HP 75 Aerial Ladder
Strength That Exceeds Standards.
E-ONE’s HP 75 features an extruded aluminum ladder that exceeds NFPA requirements with a 2.5:1 structural safety factor. In addition, the aluminum aerial will not rust, need painting, or require rung cover replacement. The HP 75 delivers lower life-cycle cost than other aerials on the market. With the combination of a robust cab and chassis, generous compartmentation, ground ladder storage, hose bed and tank size, the
HP 75 delivers outstanding value and durability.
Specifications
VERTICAL REACH
- 78′
HORIZONTAL REACH
- 70′ 2″
OVERALL HEIGHT
- 11′ 4″ (+/-1″); 4″ and 7″ lower OAH available
OVERALL LENGTH
- 37′ 1″ (options may increase OAL)
WHEELBASE
- 210″ to 230″
TIP LOAD
- 500 lb. tip load wet or dry plus 75 lbs. equipment allowance
WATERWAY
- Pinnable to ladder tip or end of section 2, with up to 1,500 GPM flow
MONITOR
- Akron, TFT or Elkhart; extended range, wireless and 2.5″ tip valve optional
OUTRIGGERS
- Single set of outriggers with 16′ spread; optional short jack with alley mode
CAB
- Typhoon or Cyclone cabs in 58″ to 80″ lengths; full-length or barrier-style doors, flat or split-raised roof
CHASSIS FRAME
- Powder-coated hot-dipped galvanized full-length double rail frame
GAWR
- 20,000 to 24,000 lb. front; 33,000 or 35,000 lb. rear
BODY
- Extruded aluminum body with center hose bed or SideStacker with optional side access doors
BODY DOORS
- Hinged, roll-up or combo; roll-up brands include ROM and Amdor
GROUND LADDERS
- Enclosed tunnel(s) for Alco-Lite or Duo-Safety ladders; Options for roof/wall ladders on aerial base and combo ladder on body
PUMP
- Hale, Waterous or Darley up to 2,000 GPM (LPM and IGPM ratings available)
TANK
- Up to 500 gallons
FOAM SYSTEM
- Direct injection, CAFS and ATP systems available with 10-, 20- or 30-gallon foam cell(s)
ELECTRICAL SYSTEM
- Multiplex electrical system with color display for driver or driver and officer, LED warning / scene lighting, generator and 120 / 240V options available
SUSPENSION
- Taper leaf spring or independent front, spring or air-ride rear
AERIAL CONTROLS
- Advanced Aerial Control System (AACS) with optional body protection and pump panel, tip or wireless controls; direct hydraulic controls also available
ENGINE
- Cummins X10 (400 or 450 HP) or X15 (565 or 605 HP)
Features and Benefits
Image Gallery
REQUEST A QUOTE
FIND A DEALER
Leading the way with advanced engineering and innovative design, E-ONE is an industry leader in product innovations, new technologies and exceeding customer expectations. Search for the E-ONE Dealer closest to you!