HP 75 Aerial Ladder
Strength That Exceeds Standards.
E-ONE’s HP 75 features an extruded aluminum ladder that exceeds NFPA requirements with a 2.5:1 structural safety factor. In addition, the aluminum aerial will not rust, need painting, or require rung cover replacement. The HP 75 delivers lower life-cycle cost than other aerials on the market. With the combination of a robust cab and chassis, generous compartmentation, ground ladder storage, hose bed and tank size, the
HP 75 delivers outstanding value and durability.
Specifications
VERTICAL REACH
- 78'
HORIZONTAL REACH
- 70' 2"
OVERALL HEIGHT
- 11' 4" (+/-2"); 4" and 7" lower OAH available
OVERALL LENGTH
- 37' 1" (options may increase OAL)
WHEELBASE
- 210" to 230"
TIP LOAD
- 500 lb. tip load wet or dry plus 75 lbs. equipment allowance
WATERWAY
- Pinnable to ladder tip or end of section 2, with up to 1,500 GPM flow
MONITOR
- Akron, TFT or Elkhart; extended range, wireless and 2.5" tip valve optional
OUTRIGGERS
- Single set of outriggers with 16' spread; optional short jack with alley mode
CAB
- Typhoon or Cyclone cabs in 58" to 80" lengths; full-length or barrier-style doors, flat or split-raised roof
CHASSIS FRAME
- Powder-coated hot-dipped galvanized full-length double rail frame
GAWR
- 20,000 to 24,000 lb. front; 33,000 or 35,000 lb. rear
BODY
- Extruded aluminum body with center hose bed or SideStacker with optional side access doors
BODY DOORS
- Hinged, roll-up or combo; roll-up brands include ROM and Amdor
GROUND LADDERS
- Enclosed tunnel(s) for Alco-Lite or Duo-Safety ladders; Options for roof/wall ladders on aerial base and combo ladder on body
PUMP
- Hale, Waterous or Darley up to 2,000 GPM (LPM and IGPM ratings available)
TANK
- Up to 500 gallons
FOAM SYSTEM
- Direct injection, CAFS and ATP systems available with 10-, 20- or 30-gallon foam cell(s)
ELECTRICAL SYSTEM
- Multiplex electrical system with color display for driver or driver and officer, LED warning / scene lighting, generator and 120 / 240V options available
SUSPENSION
- Taper leaf spring or independent front, spring or air-ride rear
AERIAL CONTROLS
- Advanced Aerial Control System (AACS) with optional body protection and pump panel, tip or wireless controls; direct hydraulic controls also available
ENGINE
- Cummins X10 (400 or 450 HP) or X15 (565 or 605 HP)
Features and Benefits
Extruded Aluminum Aerial
The aluminum aerial will not rust, need painting, or require rung cover replacement, delivering a lower life-cycle cost than other aerials on the market.
Wide Fly Section
The HP 75 extruded aluminum aerial features a fly section over 25” in width, accommodating stokes stretchers to fit between the handrails.
Maneuverability
With a short 210” wheelbase and an overall height of 11 ’4”, the HP 75 is a perfect choice for congested areas.
SideStacker™
Available with a SideStacker hose bed that can be reloaded without having to raise the aerial. Optional side access doors allow for access from ground level. Center hose bed with upper compartments on each side also available.
Aerial Controls
The Advanced Aerial Control System (AACS) provides smooth ladder operation with optional pump panel controls, tip controls and short jacking. Direct hydraulic controls are also available.
Rugged Cab and Chassis
The HP 75 is available with the durable Typhoon or Cyclone chassis with an extruded aluminum cab that exceeds NFPA / SAE crash test requirements. Choice of cab length and flat or split-raised roof to meet your department's needs.
Image Gallery
REQUEST A QUOTE
FIND A DEALER
Leading the way with advanced engineering and innovative design, E-ONE is an industry leader in product innovations, new technologies and exceeding customer expectations. Search for the E-ONE Dealer closest to you!