THE E-ONE

HR 100 TANDEM AXLE

AERIAL LADDER

A PROVEN DESIGN WITH AN INCREASED TIP LOAD

The E-ONE HR 100 ladder is based on the proven design of the HM 100 which has reliably served departments for over 40 years. The HR 100 features a 500 lb. tip load wet or dry with a -6 to 81 degree range of motion. Available in a quint or truck company design.

With over 40 years of aerial experience with an industry leading performance record, E-ONE continues delivering on our founding principles of innovation and safety.

E-ONE’s HR 100 features an extruded aluminum ladder that exceeds NFPA requirements with a 2.5:1 structural safety factor. In addition, the aluminum aerial will not rust, need painting, or require rung cover replacement. The E-ONE HR 100 Tandem Axle Quint features a 100’ vertical reach, 500 lb. tip load ladder with pump, tank and hose bed, all packaged on a tandem rear axle chassis.

Features

  • Typhoon or Cyclone cab
  • Medium, long and extended length 4-door cabs available (depending on model)
  • Optional split-raised roof
  • Integral torque box chassis
  • 230”-240” wheelbase
  • Up to 605 HP engine
  • Standard safety features such as roll cage cab, CrewGuard® & ABS brakes
  • Optional safety features such as airbags, G4® (electronic stability control) and collision mitigation system
  • 100’ extruded aluminum ladder with 2.5 to 1 structural safety factor
  • 500 lb tip-load (500 lb firefighters & 75 lb equipment) wet or dry
  • Criss-cross, under-slung jack spread of only 12’
  • Pinnable waterway
  • Options include Advanced Aerial Control System, auto level, wireless aerial controls, extended range monitor, 2.5” valve at tip, ladder brackets, axe and pike pole brackets
  • Extruded aluminum body construction
  • SideStacker body features full-depth compartments
  • Optional wide ladder tunnel is available for increased ground ladder storage
  • Tandem available in center hosebed and SideStacker configurations
  • Truck company body available rear axle (no pump or tank)
  • Hale®, Waterous®, Darley® or MAC1® pumps up to 2000 GPM
  • 300 to 500-gallon poly tank with optional foam cell(s)
  • Optional eMAX design provides low pre-connected handlines, enclosed pump operator’s panel, and additional enclosed storage
  • Optional foam systems; direct injection, CAFS, and around the pump (ATP)
  • Customizable discharges and pre-connects to meet department’s needs
  • Stainless steel discharge manifold
  • Multiplex electrical system with color display provides increased feature capability and improved diagnostics
  • Options include LED scene lights, LED ladder climbing lights and 6-20kW hydraulic generators
  • Whelen® optical and audible warning packages standard, others optional

HR 100 TANDEM AXLE HIGHLIGHTS

Contact Us

  • This field is for validation purposes and should be left unchanged.
Go to Top